10
Port Processing Session – Choose between the following modes of operation.
Manual - Ports are just serial ports manipulated via RPC / Telnet / TCP commands.
Push to Variable - RX data is pushed via Aurora RPC to given Master Remote IP.
Push to Port - RX data is pushed to given IP remote serial port via Aurora RPC.
Telnet Client - Unit will attempt to connect to given server IP and pass and receive serial port data.
Telnet Server - Unit will wait for external connection to pass and receive serial port data.
Pass-Through - Unit’s (TX/RX) serial ports are linked so any serial RX data will come out the TX on
the other serial port.
Test Serial Transmit – Enter a serial string to send out the RS-232 port for testing of connecting device.
IR Ports – Selecting the activate IR repeater mode enables the transfer of the IR ports signals to and
from the TX and RX units. If it is not selected only RPC / Telnet / TCP commands will trigger the IR ports
locally or remotely. IR files are stored on the ftp of the DXE-CAT-TX2L unit in the IR folder.
Comments to this Manuals